# Shift Templates

To schedule shifts you need to go to the second tab **Shift Templates**, and click on **Add Shift** ("+" icon in the upper right corner).

<figure><img src="https://content.gitbook.com/content/pCDT7ZJMfw2DQ9011gYH/blobs/hGRVGetlPWWQuO4c8g8J/calendar-shtmpl.png" alt=""><figcaption></figcaption></figure>

1. Enter within the pop-up the name of the Shift Template.

   <figure><img src="https://content.gitbook.com/content/pCDT7ZJMfw2DQ9011gYH/blobs/6r8rA3K2mjFdJMTbm6I4/calendar-shtmpl-add.png" alt=""><figcaption></figcaption></figure>
2. Set the identifying color

   <figure><img src="https://content.gitbook.com/content/pCDT7ZJMfw2DQ9011gYH/blobs/jJsfvTimmqJwWnIedhQa/calendar-shtmpl-add-3.png" alt=""><figcaption></figcaption></figure>
3. Set the shift start time (hours and minutes)

   <figure><img src="https://content.gitbook.com/content/pCDT7ZJMfw2DQ9011gYH/blobs/r9wHz3fos8ulXui4gFBh/calendar-shtmpl-add-2.png" alt=""><figcaption></figcaption></figure>
4. Click on **Add Shift** in the lower right-hand corner&#x20;
5. Select via the appropriate bar the shift end time

   <figure><img src="https://content.gitbook.com/content/pCDT7ZJMfw2DQ9011gYH/blobs/adYjSeN6ofeBotegcud1/calendar-shtmpl-add-4.png" alt=""><figcaption></figcaption></figure>
6. Click on **Confirm**

The shift is shown in the list and you can make changes or remove it.

To create a template with multiple shifts, follow the instructions above up to step 5, and repeat steps 4 and 5 until the desired configuration is created.

<figure><img src="https://content.gitbook.com/content/pCDT7ZJMfw2DQ9011gYH/blobs/lvnwynOCBAVu4uUEkNn4/calendar-shtmpl-add-5.png" alt=""><figcaption></figcaption></figure>

Once the shift templates have been created, you can enter the shifts into the calendar by returning to the first [Planning Calendar](https://40factory.gitbook.io/mat-webapp-1/2.14.1/basic-mat-modules/planning-calendar) section.

<figure><img src="https://content.gitbook.com/content/pCDT7ZJMfw2DQ9011gYH/blobs/r9wHz3fos8ulXui4gFBh/calendar-shtmpl-add-2.png" alt=""><figcaption></figcaption></figure>
